While I was working on the inside hull, half of my class were working for a deck. I did not join in them directly,but I helped them sometimes and saw the processing. It follows same way of composite in 'F.R.P' course.
In brief, on the moudle we waxed five times and polished with cheese clothes as well. Then we coated 'PVA' slightly. After it dried, we put ' boat coat' and 'double bias' with expoxy resin. Put form on the glasses with microballoon gap filler and pressed them with vaccum bags.The method is that by sucking the air in the bag so odjects are keeping stuck together. In invers order, put double bias and boat coat on that. Last, put 'Low density fairing filler' on the top, because it is able to do sanding and painting easily. Once finish this procedure, it could be demoulding and join to hull.
댓글 없음:
댓글 쓰기